Replacing your Hyundai H9000 (98850) wipers is a straightforward task that can significantly improve visibility and driving safety. This guide provides a step-by-step process, addressing common questions and concerns. Whether you're dealing with streaking, smearing, or simply worn-out blades, this guide will help you get back to clear driving conditions.
What Tools Do I Need to Replace My Hyundai H9000 (98850) Wipers?
You'll only need a few basic tools for this job:
- New wiper blades: Ensure you purchase the correct size and type for your Hyundai H9000 model. Checking your owner's manual or the wiper blade packaging is crucial. The part number 98850 often helps identify the appropriate replacement.
- A clean cloth or rag: This will help keep your windshield clean during the process.
How Do I Remove the Old Wiper Blades on My Hyundai H9000?
The process for removing old wiper blades is generally consistent across many vehicles, including the Hyundai H9000. However, slight variations might exist based on the specific wiper arm design.
- Lift the wiper arm: Carefully lift the wiper arm away from the windshield. It's usually held in place by a simple clip or pressure. Important: Before you lift, ensure your ignition is off and the wipers are in the "off" position.
- Locate the release tab: Most wiper arms have a tab or button that releases the wiper blade. This is usually near the connection point between the arm and the blade.
- Push the release tab: Gently press or push the release tab while simultaneously pulling the wiper blade away from the arm. Some blades may require a slight twisting motion to detach.
- Remove the old blade: Once the tab is released, the old blade should slide off relatively easily.
How Do I Install the New Wiper Blades?
Installing the new blades is typically the reverse process of removal:
- Align the new blade: Position the new wiper blade onto the wiper arm, ensuring it aligns correctly with the existing connecting point.
- Push the blade onto the arm: Push the blade firmly onto the arm until it clicks into place. You should hear or feel a secure connection.
- Lower the wiper arm: Gently lower the wiper arm back onto the windshield.
- Test the wipers: Turn on your wipers to ensure they operate smoothly and wipe cleanly across the windshield.
What Size Wiper Blades Do I Need for My Hyundai H9000?
The specific size of the wiper blades required will depend on the year and model of your Hyundai H9000. Consult your owner's manual for the precise measurements. You can also find this information online through your Hyundai's model-specific resources. Using incorrect sizes may affect the effectiveness of your wipers.
Where Can I Buy Replacement Wiper Blades for My Hyundai H9000?
Replacement wiper blades are widely available at various retailers, including:
- Auto parts stores: Local auto parts stores (e.g., AutoZone, Advance Auto Parts, NAPA) typically carry a wide range of wiper blades.
- Online retailers: Online retailers (e.g., Amazon, eBay) offer a convenient way to purchase wiper blades, often at competitive prices.
- Hyundai dealerships: Hyundai dealerships will carry genuine Hyundai wiper blades ensuring the best fit and quality.
What if My New Wiper Blades Still Leave Streaks or Smears?
Even with new wiper blades, streaking or smearing can occur due to several factors. Check for:
- Dirty windshield: Clean your windshield thoroughly with glass cleaner.
- Incorrect installation: Ensure the blades are correctly installed on the wiper arms.
- Worn-out wiper arm: If the arm itself is damaged or worn, it might need replacement.
- Contamination: Road grime or insect residue can build up and cause streaking. Consider using a dedicated glass cleaner for optimal results.
By following these steps and addressing potential issues, you can ensure your Hyundai H9000 (98850) wipers provide you with consistently clear visibility, enhancing your driving safety. Remember to always prioritize safety and consult your owner's manual for specific details relating to your vehicle model.
